Adjust the build skirt of naval factories
-
Allow naval facs to be rotated somehow
-
@black_wriggler said in Adjust the build skirt of naval factories:
I think fixing the roll-off points would go a long way to improving the behaviour of naval facs, i remember once playing around with rally points for ages trying to get the ships to leave cleanly when they finish building.
This involves giving them more space - we've tackled this with pull request. One of the change is to increase the distance of the roll off point based on the size of the unit.
Footprint size of battleship
Old roll off point, too close to the factory where the unit doesn't fit (see previous image for footprint size) so the unit has to find an alternative roll off point location
New roll off point, further away from the factory based on the size of the unitThis fixes the 'weird' roll off that especially battleships had, but again - it assumes there is actually space on the sides of the factory and we currently do not guarantee that. In practice this will still be weird behavior for the majority of players and all the AIs.
-
And I'd like to mention that this is a big problem, you are just used to it. If this game would launch now* with such poor roll off points then we'd all be so frustrated that we'd drop it after a week. And why wouldn't we, if battleships get stuck that easily
. Note that some change is required, as otherwise new players and AIs will always make this mistake. And that destroys the immersion of the game - which, again: that is a problem. -
We could also only apply a vertical stretch, but not a horizontal stretch.
That allows them to be cliff buildable in the majority of cases as we have right now, but still encourages people to space them out more.
-
While I'd favour the naval factory skirt size changes to resolve this over other options such as changing ship sizes, if people value needing cliff-building to the same extent as now so much that it means a frustrating bug for new players won't be fixed, then I'd presume a possible alternative option in addition to this could be to increase the build radius of engineers slightly. E.g. increase by 1 for T1 engi, 2 for T2, and 3 for T3, which I'd expect would give scope for increasing the skirt size slightly without preventing cliff-building in many cases. Obviously there would be wider balance implications of such a change though.
From my recollection of the first time I ran into the issue when playing FAF it made it a really frustrating negative experience, and the main reason it's not been a bigger issue for me is because I've assumed it was similar to the 'Engi bumping' pathfinding problems where it's not possible to fix the issue and so something I'd just have to live with if I play FAF.
-
Thank you for tackling this issue.
I agree with your proposed solution of adding rotated copies of the naval factory, but something should be done to avoid cluttering the build menu-just like others, I always found it weird how depending on whether you are on the right or left side of the map you'd have more or less problems (ships having to go around the factory itself).
You don't get this issue with ground or air factories as units are built in the middle of them, but any change here would most likely impact balance.
-
Is it possible to draw two rectangles around naval factory, when placing it. One corresponding to space needed to t2 ships being able to pass, and second corresponding to t3 ships being able to pass? Something like fire radius when placing pd's? So it would be much easyer to see, how much place is needed for eventual upgrade or passage later.
-
@wikingest said in Adjust the build skirt of naval factories:
Is it possible to draw two rectangles around naval factory, when placing it. One corresponding to space needed to t2 ships being able to pass, and second corresponding to t3 ships being able to pass? Something like fire radius when placing pd's? So it would be much easyer to see, how much place is needed for eventual upgrade or passage later.
Yes - some form of radius when building the factory is possible. Similar to how the Soothsayer has a radius upon building to indicate the radius of its effect.
-
How about making ships "phase through" the naval factory that built them until they have reached their roll of point?
It wouldn't introduce nearly as many headaches as changing factory skirt sizes and land factories essentially already behave like that, with them constructing a unit in their normally unpathable center.
-
It wouldn't introduce nearly as many headaches as changing factory skirt sizes and land factories essentially already behave like that
They do not, they use the same mechanic as any other factory / unit. It is just that land units tend to have a low diversity in footprint size and they are a lot more maneuverable.
-
what I meant is that a land unit gets build on a point that's not reachable for said unit after the construction is complete. Can't move back onto a factory afterall
-
@cheeseberry said in Adjust the build skirt of naval factories:
what I meant is that a land unit gets build on a point that's not reachable for said unit after the construction is complete. Can't move back onto a factory afterall
My mistake, I thought they did have something similar. See also their occupation layers:
Only quantum gates can be traversed through
.Naval yards have something similar, but that won't fix the issue: the issue is not that the unit is colliding with the factory it is building. The issue is that it can not move towards the roll off point. Therefore it computes an alternative location that is close to the roll off point, and that causes it to (eventually) clip into all sorts of things. See also my previous post:
For your idea, this is the roll off point for a land factory:
Which is guaranteed to be clear of other things, including other buildings.
-
J Jip referenced this topic on
-
You can walk through a quantum gate? Learned something today
Also yes, the issue isn't caused by the ship colliding with the factory after completion, but I think the issue might be solved by disabling said collision for a couple seconds after completion.
-
I'm not aware of a method to skip collisions all together, I don't think there's such a flag.
-
the massive units, such as the GC seem to have something like that.
They ignore buildings during pathing all together, dealing damage to opponent's buildings they step on but crucially just passing through (over?) your own buildings without effecting them.
No clue if something like that is doable for navy units, but at least something kinda similar exists
-
Yes, but I'm not sure how we can switch between the type of pathing for individual units. There is no flag that you set, it is a blueprint value that determines what it can and can not walk over, set during loading.
-
hmm I see
could we maybe adapt the behavior land factories use with their roll off?
-
It uses the same function, the difference is in the units. A battleship just requires a lot of space to leave the dock.
-
While it uses the same function, the land unit spawns on unpathable terrain, while the navy unit does not, right?
So could we maybe make that part of the factory where the battleship is being built unpathable too to achieve the same "phase through unpathable terrain" effect?
-
Yes, and it can phase through the naval factory. It can already do that
. But the issue is in the roll off point, not where the unit spawns. It is too close to the naval factory.And that doesn't remove the issue that if placed improperly you can create a pathfinding garbage can between naval factories, especially for - yet again, battleships and the like.
A work of art is never finished, merely abandoned
